When my Satria broke down with zero compression in cylinders 1 and 3, it was clear that a simple fix wouldn’t cut it. To get to the root cause, the only option was to remove the 4G93T engine and dismantle it completely. It might sound drastic, but with a full overhaul already planned, the engine needed to come out anyway.
Step One: Clearing the Engine Bay
The first task was to clear out the engine bay. This wasn’t a quick job—it took time and patience, but it was essential. The radiator came out first, followed by the air-conditioning system, power steering components, intercooler, and the turbo manifold. It was like peeling away layer after layer, each piece coming off one by one.
As we worked through the engine bay, the engine itself became more exposed. The parts were heavy and required careful handling. But after about an hour of removing the clutter, the engine was finally out. While that felt like a significant achievement, we still weren’t able to pinpoint the exact cause of the zero compression yet.
First Clue: Rust Everywhere
Although the engine was now out, the root cause of the zero compression in cylinders 1 and 3 still remained a mystery. However, the removal did reveal one obvious issue: the cooling system was in rough shape. We noticed heavy rust buildup inside the water hose and also in the radiator itself.
That kind of corrosion is never a good sign, and it’s likely that the radiator will need to be replaced. It’s one more part to add to the growing shopping list, but at least we’re uncovering problems that would have caused future headaches.
Getting to the Heart of the 4G93T: The Dismantling Begins
With the 4G93T fully out and the radiator identified as a problem area, it was time to get down to the real heart of the issue. To continue, we need to strip the engine down further—this meant inspecting the cylinder head, valves, pistons, and rings. It’s only by fully dismantling these parts that we can figure out why cylinders 1 and 3 had no compression at all.
The next step is crucial: removing the cylinder head and examining the pistons and valves. Possible causes for the zero compression could be:
- A blown head gasket
- Bent or burnt valves
- A cracked cylinder head
- Damaged pistons or piston rings
The truth is, until the teardown is complete, we won’t know for sure. But these are the common culprits behind low compression, and we’ll be taking a close look at each of them.
1 thought on “4G93T Out: Prepping for the Full Overhaul”